Table of Contents
Advertisement
Webpage
The supported features are listed as the following:
•
•
•
•
Front Panel
The supported features are listed as the following:
•
•
USB menu to export all verification reports and saved label image file.
Calibration
Calibrating the verifier maintains the accuracy of the verifier when scanning an
image. Calibration is performed prior to the shipment of the printer.
Note: Honeywell recommends calibrating the verifier every six months for maximum
performance.
Verifier Calibration Card
The calibration card is used to calibrate the verifier. It is very important to follow the
instructions on the calibration card packaging for proper care of the calibration
card. If you lose your calibration card, visit
the PX940 printer product page.
Handling Instructions
•
•
•
•
•
Note: DO NOT touch the section of the calibration card that is enclosed in the red box as
shown below.
42
Verification configurations
Verification statistics
Restore default verification database and failed label image files
Verification reports for download
Verifier Calibration Wizard
Verification Results Display Wizard - Allow the user to browse through all the
barcodes detailed result in the last label printed.
When not in use, keep the calibration card inside its original packaging, away
from direct light exposure and stored at room temperature
Keep calibration card clean.
Use a dry cloth to remove any dirt if needed.
Do not bend the card
Do not perform verifier calibration if the card is damaged.
www.honeywellaidc.com
and navigate to
PX940 User Guide
Advertisement
Table of Contents
