Honeywell PX940 User Manual page 29

Note: There is a media guide that is located near the printhead. It is recommended to adjust
the media guide all the way to the right in order to insert the media. If not, it can be
difficult to load the media.
7.
8.
front arm in place (PX940A)
9.
10. Close the media cover.
PX940 User Guide
Adjust the label gap and black mark sensor. The sensor blue LED should line
up with the center of the media.
Turn the printhead lift lever clockwise to close the printhead and lower the
front arm and click into place.
Press the Print button to advance the media.
front arm in place (PX940V)
15