Set Up Voicemail On Your Phone; Block Caller Id - Cisco 6800 Series User Manual

Set up Voicemail on Your Phone

Before you begin
Call forwarding must be enabled on your phone before you can forward your calls in specific situations.
Procedure
Step 1
Press Applications
Step 2
Select User preferences > Call preferences.
Step 3
Select On for Call forwarding to enable call forwarding.
Step 4
Enter a phone number for each of the call forwarding services that you want to enable:
• Forward all number—Forwards all incoming calls to a target phone number.
• (6821)Forward busy—Forwards all incoming calls to a target phone number when the primary line is
• (6841 and 6851)Forward busy number—Forwards all incoming calls to a target phone number when
• (6821)Forward no answer—Forwards an incoming call that is not answered.
• (6841 and 6851)Forward no answer number—Forwards an incoming call that is not answered.
• Fwd no answer delay—Assigns a response delay time.
Step 5
Press Set.
Set up Voicemail on Your Phone
If your administrator has not set up your voicemail phone number on your phone, you can set it up yourself.
Procedure
Step 1
Press Applications
Step 2
Select User preferences > Call preferences.
Step 3
Enter your voicemail phone number in Voice mail.
Step 4
Press Set.

Block Caller ID

You can block your caller identification to prevent your name and phone number from being displayed on
the receiver's screen when you make a call. This feature helps you to maintain privacy.
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
70
.
active.
the primary line is active.
If your administrator disables the feature key synchronization (FKS) on your phone, you can enter the
value as number of seconds after which call needs to be forwarded.
If your administrator enables feature key synchronization (FKS) on your phone, you can enter the value
as number of rings after which call needs to be forwarded.
.
Settings