Update Firmware; Dual Image - Buffalo BS-GS20 Series User Manual

Chapter 2 Settings

Update Firmware

Update firmware with the local firmware file.
Select a file image to update and click [Browse] to select the firmware image, then click [Update].
Notes:
• Do not turn off the switch or close the browser while updating.
• To finish the update, reboot the switch.
• If changing the firmware to version 1.0.3.32 or earlier, the Settings username and password may also be changed
unintentionally. For more detailed information, refer to the "Restrictions" section in appendix A.
File Image

Dual Image

The switch can save up to 2 firmware files and can be configured to choose one for booting.
Image Name
Action
Image Description
Select a file image to update.
Select an image to change the action.
Select the action for the image selected on "Image Name".
Active
Reads the image when the switch boots.
This setting will be applied after clicking [Apply] and rebooting the switch.
None
The image will not be used.
This setting will be applied after clicking [Apply] and rebooting the switch.
Delete
Select [Delete] and click [Apply] to delete the image.
The image will be deleted without having to reboot the switch.
Enter the image's description. You may enter up to 50 alphanumeric characters.
Note: The image description will never be initialized even if the switch is
initialized.
72