Lldp Port - Buffalo BS-GS20 Series User Manual

Chapter 2 Settings

LLDP Port

Configure LLDP for each port.
Status
Notification
Port Description TLV
System Name TLV
System Description TLV
System Capabilities TLV
Management Address TLV
Disable
Disable LLDP.
Tx Only
Enable transmitting LLDP packets only.
Rx Only
Enable receiving LLDP packets only.
Tx and Rx
Enable transmitting and receiving LLDP packets.
If enabled, SNMP traps will be sent to the SNMP server when the neighbor table is
updated.
Note: To use notification, configure SNMP manager and SNMP trap settings.
If enabled, the port information (port number) will be included in LLDP packets.
If enabled, the switch name will be included in LLDP packets.
Note: The switch name can be configured on the [Basic] - [System] page.
If enabled, the product name will be included in LLDP packets.
If enabled, the system capabilities will be included in LLDP packets.
If enabled, the switch's IP address will be included in LLDP packets.
27