Ports - Buffalo BS-GS20 Series User Manual

Chapter 2 Settings
Root Bridge Priority
(STP/RSTP only)
Root MAC Address
(MSTP only)
CIST Root Bridge Priority
(MSTP only)
CIST Root MAC Address
(MSTP only)
Regional Root Bridge
Priority
(MSTP only)
Regional Root MAC
Address
(MSTP only)
Switch MAC Address
Priority
Path Cost
Fastlink
Status
Role

Ports

Configure STP settings for each port. Path cost can be switched between "Auto" and "Manual".
Priority
Path Cost
Select a root bridge priority of this switch.
Displays the root bridge's MAC address.
Displays the CIST root bridge's bridge priority.
Displays the CIST root bridge's MAC address.
Displays the bridge priority of the root bridge in the MST region.
Displays the MAC address of the root bridge in the MST region.
Displays this switch's MAC address.
Displays the port priority.
Displays the path cost.
Displays if fastlink is enabled or disabled.
Displays the port status.
Displays the port role.
Enter the port priority in hexadecimal format. This is used to decide the path to
the root bridge.
If path cost is set to "Manual", you can edit the value. This is used to decide the
path to the root bridge.
58