Lldp; Lldp Properties - Buffalo BS-GS20 Series User Manual

Chapter 2 Settings

LLDP

LLDP Properties

Configure LLDP.
TLV Advertised Interval
Hold Multiplier
Reinitializing Delay
Transmit Delay
Fast Start Duration
Enter the interval of sending LLDP packets. (5-32768 seconds)
Enter the amount of time of TTL (Time To Live: the time that LLDP packets
are held before the packets are discarded) measured in multiples of the TLV
advertised interval. (2-10)
Enter the time that passes between disabling and reinitializing LLDP. (1-10
seconds)
Enter the time that passes between changing the LLDP settings and transmitting
LLDP frame. (1-8192 seconds)
Enter the number of times that LLDP packets are sent when the LLDP-MED-
compatible device is detected.
26