Cisco Nexus 7000 Series Configuration Manual page 120

Configuring LISP Map Server with Extranet Policies
Procedure
Step 1
Configure the MS for IPv4 and IPv6 services.
MS# configure terminal
MS(config)# router lisp
MS(config-router-lisp)# service ipv4
MS(config-router-lisp)# map-server
MS(config-router-lisp)# map-resolver
MS(config-router-lisp)# exit-service-ipv4
!
MS(config-router-lisp)# service ipv6
MS(config-router-lisp)# map-server
MS(config-router-lisp)# map-resolver
MS(config-router-lisp)# exit-service-ipv6
Step 2
Configure the LISP sites.
In the following configuration, there are three instance-IDs (100, 200, and 300).
MS# configure terminal
MS(config)# site SITE_ALL_v4
MS(config-lisp-site)# authentication-key cisco
MS(config-lisp-site)# eid-record instance-id 100 10.1.0.0/16 accept-more-specifics
MS(config-lisp-site)# eid-record instance-id 200 10.2.0.0/16 accept-more-specifics
MS(config-lisp-site)# eid-record instance-id 300 10.3.0.0/16 accept-more-specifics
! Configure another site!
MS(config)# site SITE_ALL_v6
MS(config-lisp-site)# authentication-key cisco
MS(config-lisp-site)# eid-record instance-id 100 2001:DB8:1::/48 accept-more-specifics
MS(config-lisp-site)# eid-record instance-id 200 2001:DB8:2::/48 accept-more-specifics
MS(config-lisp-site)# eid-record instance-id 300 2001:DB8:3::/48 accept-more-specifics
Step 3 Configure the LISP Extranet policies on MS. The eid-record-provider instance-id and eid-record-subscriber
instance-id commands define the extranet policy for the provider and subscriber instances.
MS(config-router-lisp)# extranet ext_policy_1
MS(config-router-lisp-extranet)# eid-record-provider instance-id 300
MS(config-router-lisp-extranet)# ip-any
MS(config-router-lisp-extranet)# exit-eid-record-provider
!
MS(config-router-lisp-extranet)# eid-record-subscriber instance-id 100
MS(config-router-lisp-extranet)# ip-any
MS(config-router-lisp-extranet)# exit-eid-record-subscriber
!
MS(config-router-lisp-extranet)# eid-record-subscriber instance-id 200
MS(config-router-lisp-extranet)# ip-any
MS(config-router-lisp-extranet)# exit-eid-record-subscriber
Cisco Nexus 7000 Series NX-OS LISP Configuration Guide
108
Configuring LISP Extranets