Configuring Lisp Extranets; Finding Feature Information; Feature History For Lisp Extranets; Information About Lisp Extranets - Cisco Nexus 7000 Series Configuration Manual

Configuring LISP Extranets

This chapter contains the following sections:
•
•
•
•
•
•

Finding Feature Information

Your software release might not support all the features documented in this module. For the latest caveats
and feature information, see the Bug Search Tool at
for your software release. To find information about the features documented in this module, and to see a list
of the releases in which each feature is supported, see the "New and Changed Information"chapter or the
Feature History table in this chapter.

Feature History for LISP Extranets

Table 9: Feature History for LISP Extranets
Feature Name
Locator ID Separation Protocol
(LISP) Extranets

Information About LISP Extranets

Starting from Cisco NX-OS 8.3(1), LISP Extranets support is added to the Locator ID Separator Protocol
(LISP) in Cisco NX-OS.
Campus fabric architecture for enterprise network uses LISP as its overlay control protocol. LISP based
deployments use the LISP Virtualization solution to provide segmentation, isolation, and security among the
Finding Feature Information, on page 103
Feature History for LISP Extranets, on page 103
Information About LISP Extranets, on page 103
Licensing Requirements for LISP, on page 106
Guidelines and Limitations for LISP Extranets, on page 106
Configuring LISP Extranets, on page 107
C H A P T E R
https://tools.cisco.com/bugsearch/
Releases Feature Information
8.3(1) This feature is supported on Cisco Nexus 7000 Series
switches.
Cisco Nexus 7000 Series NX-OS LISP Configuration Guide
8
and the release notes
103