Configuring Lisp Extranets; Configuring Lisp Map Server With Extranet Policies - Cisco Nexus 7000 Series Configuration Manual

Configuring LISP Extranets

• Only one provider IID is supported per policy configuration on Cisco IOS XE Everest 16.9.1 release.
Configuring LISP Extranets
This section includes the following topics:

Configuring LISP Map Server with Extranet Policies

The LISP Extranet feature is configured through the extranet policies. Users can configure these policies as
part of the Map Server (MS) configuration and the xTR routers will dynamically learn the policies.
The LISP Extranet feature supports both IPv4 and IPv6 address families.
Figure 23: LISP Extranet Topology
In this example, the following devices are used:
• Map Server (MS) device with Cisco IOS XE Everest 16.9.1 release and later.
• xTR device with Cisco NX-OS Release 8.3(1) and later.
• The xTR1 and xTR2 have a mask length of /24, and the xTR3 has mask length of /16.
Before you begin
Create VRFs using the vrf context command.
Enable feature LISP.
Cisco Nexus 7000 Series NX-OS LISP Configuration Guide
Configuring LISP Extranets
107