Cisco Nexus 7000 Series Configuration Manual page 123

Configuring LISP Extranets
switch# show ip route vrf VRF3
IP Route Table for VRF "VRF3"
10.1.1.0/24, ubest/mbest: 1/0 time
VNI) tunnelid: 0xa0a0a01 encap: VXLAN
10.2.1.0/24, ubest/mbest: 1/0 time
VNI) tunnelid: 0xa0a0a01 encap: VXLAN
xTR1 verifications
switch# show ip lisp map-cache vrf VRF1
LISP IP Mapping Cache for VRF "VRF1" (iid 100), 1 entries
10.3.0.0/16, uptime: 00:00:20, expires: 23:49:43, via map-reply, non-auth
Producer Set: 4000 map-reply
Locator
10.10.10.3
switch# show ip route vrf VRF1
IP Route Table for VRF "VRF1"
10.3.0.0/16, ubest/mbest: 1/0 time
VNI) tunnelid: 0xa0a0a03 encap: VXLAN
switch# show ip lisp map-cache vrf VRF2
LISP IP Mapping Cache for VRF "VRF2" (iid 200), 1 entries
10.3.0.0/16, uptime: 00:00:20, expires: 23:49:43, via map-reply, non-auth
Producer Set: 4000 map-reply
Locator
10.10.10.3
switch# show ip route vrf VRF2
IP Route Table for VRF "VRF2"
10.3.0.0/16, ubest/mbest: 1/0 time
VNI) tunnelid: 0xa0a0a03 encap: VXLAN
Configuring Local LISP Extranets
Users can share resources across VRFs on the same device using LISP Extranets. All the configurations are
done on the Map Server (MS). The xTRs in a LISP network dynamically learn the policies and share the
policies across VRFs.
*via 10.10.10.1%vrf-underlay, nve1, [240/2], 00:39:27, lisp, eid, segid: 100, (Remote
*via 10.10.10.1%vrf-underlay, nve1, [240/2], 00:39:27, lisp, eid, segid: 200, (Remote
Uptime State
00:00:20 up
*via 10.10.10.3%vrf-underlay, nve1, [240/2], 00:49:27, lisp, eid, segid: 300, (Remote
Uptime State
00:00:20 up
*via 10.10.10.3%vrf-underlay, nve1, [240/2], 00:49:27, lisp, eid, segid: 300, (Remote
Priority/ Data Control
Weight in/out in/out
1/100 0/0 0/0
Priority/ Data Control
Weight in/out in/out
1/100 0/0 0/0
Cisco Nexus 7000 Series NX-OS LISP Configuration Guide
Configuring Local LISP Extranets
MTU Encap-IID
1500 300
MTU Encap-IID
1500 300
111