Table of Contents
Advertisement
3.3
Module Configuration
Introduction
General FSC system
configuration
10/01
The FSC Safety Manager is configured at the FSC user station using the
FSC Development System software (R42x) or FSC Navigator software
(R5xx, R600). There are basically three configuration levels:
• General FSC system configuration,
• Central Part module configuration, and
• I/O module configuration.
Each of these levels is discussed in more detail below.
The starting point for all configuration operations in the FSC
Development System software (R42x) is the Configure FSC system option
from the FSC-DS main menu.
The starting point for all configuration operations in the FSC Navigator
software (R5xx, R600) is the System Configuration option, which can be
called up in three ways:
• Menu bar:
• Button bar:
• Navigation area: FSC Project Configuration / System Configuration
The FSC user software (FSC Development System or FSC Navigator)
allows the user to configure a number of general system settings such as:
• requirement class,
• FSC system type specification (R42x) or system configuration (R5xx,
R600),
• process safety time,
• number of cabinets, and
• number of racks.
For detailed information on the FSC user software and on
configuring the FSC system, refer to the FSC Software Manual.
FSC Safety Manager Installation Guide
Project / System Configuration
I/O
Continued on next page
45
Hide quick links:
Advertisement
Table of Contents
