Unpacking And Placement; Table 1-3 Important Unpacking Considerations - Honeywell FSC-SM Installation Manual

1.4

Unpacking and Placement

Unpacking
Moving
10/01
Unpack the equipment, check the shipment against the invoice, and
immediately notify your Honeywell representative if any items are
missing. Table 1-3 lists important considerations when unpacking the
equipment.
Table 1-3 – Important unpacking considerations
IF ...
the FSC Safety Manager system is
comprised of individual modules
the package has visual damage
the package is removed and
equipment has visual damage
The FSC Safety Manager equipment can be moved in any one of four
methods:
• fork lift,
• mobile lifter,
• roller, or
• crane.
Special consideration for each of these methods is provided in the
following information.
When moving the FSC Safety Manager equipment:
CAUTION
• use lifters with a capacity of 1100 kg (2500 lb) or greater, and
• do not tilt the cabinet more than 45º front or back to avoid damaging
the doors (they are not recessed).
FSC Safety Manager Installation Guide
THEN ...
the component parts are packaged in
labeled boxes.
the equipment inside may also be
damaged.
inform the insurance company and
your Honeywell representative. In any
case, do not operate the equipment
until confirmation from Honeywell
Safety Management Systems has
been obtained.
Continued on next page
13