Section 2 - System Component Installation; Section Overview - Honeywell FSC-SM Installation Manual

Section 2 - System Component Installation

2.1

Section Overview

About this section
Subsection
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
10/01
This section provides general installation information for various
components of the FSC Safety Manager (FSC-SM) system. Topics
included in this section are:
Section Overview ...................................................................................... 21
Installation Considerations........................................................................ 22
Cabinet Installation ................................................................................... 23
Cabling Considerations............................................................................. 24
Cabling Installation.................................................................................... 29
System Power Connections...................................................................... 34
System Ground Connections .................................................................... 36
UCN Connections ..................................................................................... 39
This section describes in detail only those installation
ATTENTION
procedures and considerations specific to the FSC Safety Manager Module
(FSC-SMM) and the TotalPlant Solutions (TPS) system. Installation
procedures and considerations specific to the FSC components can be
found in the FSC documentation.
REFERENCE - For detailed information regarding
• site planning and installation, refer to SM02-550 - TPS System Site
Planning Manual in Binder TPS 3020-1 System Site Planning-1.
• post-installation checkout procedures, refer to FS13-500 - FSC Safety
Manager Service Manual in this binder.
FSC Safety Manager Installation Guide
Topic See Page
21