Battery Installation Or Replacement - Omega MWTC SERIES User Manual

THERMOCOUPLE
MEASUREMENT AREA
Installing your connector/transmitter in an application were the device will be exposed
to ambient temperatures above or below the operating limits specified in this manual
will damage your unit and cause the unit to malfunction and produce incorrect
operation.

4.4 Battery Installation or Replacement

4.4.1 Model MWTC-(*)-915
To install or replace the battery in your Connector/Transmitter you must first
remove the two screws located on the back side of your device. This will allow
you to access the battery compartment.
AMBIENT AREA
CONNECTOR/TRANSMITTER
THERMOCOUPLE PROBE
Figure 4-16. Recommended Thermocouple Placement
CAUTION:
+
BATTERY (NOTE POLARITY)
Figure 4-17. Battery Compartment
Connector Operation
SAFE
MATING CONNECTOR
-
4
WIRELESS THERMOCOUPLE CONNECTOR
–
MWTC
TYPE
®
TC
TX
PRESS PRESS
SETUP I / O
+ LOW
BATT
4-14