Section 3 Software; Getting Started; Software Installation - Omega MWTC SERIES User Manual

Section 3 – Software

3.1 Getting Started

The following program files are included on the MWTC User Software CD
supplied with your Receiver. These files can also be downloaded from the
omega.com website should you misplace your CD.
• MWTC Connector/Transmitter Setup Utility Program
• TC-Central Measurement and Data Logging Program

3.2 Software Installation

3.2.1 System Requirements
Your PC should meet the following minimum requirements:
• Pentium Class processor
• Hard Drive Space: 210 meg
• Ram: 256 meg or higher
• 1 Available USB Port
• 1 CD-ROM Drive
• Windows 2000, XP, Vista (32bit), or 7 Operating System
3.2.2 Software Installation
Insert the MWTC Series User CD that was included with your receiver unit
into the CD-ROM drive on your PC. Your system should begin the installation
process automatically. If the software installation does not start automatically
please see the "Troubleshooting" Section 7.
This welcome screen should be visible on your computer screen. To continue
with installing the program click the "Next >" button.
3
Software
Figure 3-1.
Welcome Screen
3-1