Connect The Transmitter Screen - Omega MWTC SERIES User Manual

If you have not already connected your connector/transmitter to a USB port
on your PC you must do this now before continuing. After your unit has been
connected click the "Next >" button to proceed and continue setting up your
connector/transmitter.
After successful communication between your connector/transmitter has been
established you can click the "Next >" button to proceed and continue setting up
your connector/transmitter. If you did not receive this confirmation of proper
communication you should click the "Back" button to try connecting again. If
you still do not obtain a good connection visit the "Troubleshooting" Section of
this users guide for addition.
4
Connector Operation
Figure 4-7.
Connect The
Transmitter
Screen
Figure 4-8.
Establish A
Link Screen
4-6