Tools Menu Tab - Omega MWTC SERIES User Manual

3
Software
Chart
Performs the same functions as the Chart context menu. See Chart Tab Menu
(Section 3.6) for an explanation of this menu.
Data Log
Performs the same functions as the "Auto Scroll Rows" checkbox and the
"Adjust" button on the data log. See Data Log Menu (Section 3.8) for an
explanation of these functions.
3.9.3 Tools Menu
Figure 3-23. Tools Menu Tab
Configure
Displays the same dialog box as the Channels context menu, Configure menu
item, after you select a channel to configure. See Channels Tab above for an
explanation of this dialog box.
Auto Connect Receiver
Normally disabled, if you have established communications with a receiver
connected to your PC. If for some reason such as the receiver being replaced
with a different one, this menu item will be available. When selected, TC Central
will send "+++" to each and every available COM port in an attempt to identify
a port with a receiver connected to it. If TC Central finds a receiver, it will
perform the necessary configuration of the receiver and display the COM port
number in Green in the status bar. Even though your receiver is connected via a
USB Cable, the USB drivers installed create a "virtual" COM port, usually a port
number greater than COM4. Once connected, TC Central saves (remembers) the
port number you are using, and will automatically connect to it the next time TC
Central is started.
3-18