Setup Mode - Omega MWTC SERIES User Manual

SETUP BUTTON
Press and hold the "ON/OFF" button. While the "ON/OFF" button is being
held, press the "SETUP" button one time and then release the "ON/OFF"
button. The green (TX) indicator on the front of your device should be blinking
at a steady rate. This indicates your connector/transmitter is ready to run the
configuration utility software.
STEP 2. Launch Setup Utility Program.
To launch the MWTC Connector/Transmitter setup utility program on your PC
begin by accessing the "Programs" list under your "Start Menu".
Scroll through the list of to find the "TC-Central" folder, then select the MWTC
Configuration Program.
Figure 4-4. Launch Setup Utility Program
WIRELESS THERMOCOUPLE CONNECTOR
–
MWTC
TYPE
TC
TX
PRESS PRESS
SETUP I / O
+
LOW
BATT
ON/OFF BUTTON
Figure 4-3. Setup Mode
Connector Operation
®
4
4-4