Mwtc Connector/Transmitter Setup Utility Program; Tc-Central Measurement And Recording Program - Omega MWTC SERIES User Manual

3
Software

3.4 MWTC Connector/Transmitter Setup Utility Program

This utility is used to program your connector/transmitter for the following
operating parameters: Channel Number, Sample Rate, and data logging
(MWTC-D). For complete instructions on using this program please see Section 4.

3.5 TC-Central Measurement and Recording Program

To launch the TC-Central program on your PC begin by accessing the
"Programs" list under your "Start Menu" Next, scroll through the list of
program folders to find the "TC-Central" folder. Inside the "TC-Central" folder
click on the "TC-Central" program link. This will start the software running.
3.5.1 Channels TAB Menu
Channels Tab
When TC-Central starts up, the "Channels" tab is displayed. This view allows
you to see temperatures and properties for up to 12 connector/transmitter at one
time
3-6
CHANNELS
TAB
Figure 3-9. Channels TAB Menu Screen
Figure 3-10. TC-Central Program