Enable Router Mode; Generate A New Backhaul Password - NETGEAR CBK40 User Manual

5. In the Region list,- select your region.
In some locations, you cannot change this setting.
6. To control the SSID broadcast, select or clear the Enable SSID Broadcast check box.
When this check box is selected, the cable modem router broadcasts its network name (SSID) so that
it displays when you scan for local WiFi networks on your computer or WiFi device.
7. Click the Apply button.
Your settings are saved.

Enable Router Mode

To enable router mode:
1. Launch a web browser from a computer or mobile device that is connected to your Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time that you logged in.
The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Router / Bridge Mode.
The Router / Bridge Mode page displays.
5. Select the Router Mode radio button.
6. Click the Apply button.
Your settings are saved.

Generate a New Backhaul Password

The backhaul password is a security key that is used in WiFi communication between the cable modem
router and the satellite. You can generate a new backhaul password. After you generate a new backhaul
password, you must use the Sync button to build a new backhaul connection so that the cable modem
router and satellite can communicate with each other using WiFi.
To generate a new backhaul password:
1. Launch a web browser from a computer or mobile device that is connected to your Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time that you logged in.
The user name and password are case-sensitive.
Orbi WiFi System
Specify Network Settings
54