Table of Contents
Advertisement
Enable IP Passthrough Mode
To turn off the hotspot router functionality and assign the network IP address directly to the
attached device, enable IP passthrough.
If you make this change, the attached device restarts using a different driver configuration.
Note:
This feature is available to PC users. If you are a Mac user, do not
enable this option because you will be unable to access your device.
To enable IP passthrough mode:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
2.
Enter http://m.home or http://192.168.1.1.
A login screen displays.
3.
Enter the administrator login password.
The default password is admin. The password is case-sensitive.
4.
Select Settings > Router > Basic.
5.
In the LAN section, select the Enabled radio button next to IP Passthrough Mode.
6.
Click the Submit button.
Telstra Pre-Paid 4G My Pocket Wi-Fi Ultimate
Advanced Settings
49
Advertisement
Table of Contents
