Set Up And Activate Using The Orbi Cable Modem Router Web Interface; Set Up Using The Orbi Cable Modem Router Web Interface - NETGEAR CBK40 User Manual

Set Up and Activate Using the Orbi Cable Modem Router Web
Interface
If you do not want to use the NETGEAR Orbi app to set up and activate your Orbi cable modem router and
satellite, you can use the instructions in the following sections to help you install your cable modem router
and satellite.

Set Up Using the Orbi Cable Modem Router Web Interface

You can set up your Orbi cable modem router and satellite using the Orbi cable modem router web interface.
We recommend that you do this using the NETGEAR Orbi app. If you do not own a smart phone or tablet,
you can use the following instructions.
Figure 6. Set up your Orbi cable modem router and satellite
To setup your cable modem router and satellite using the cable modem router web interface:
1. Collect your Internet service provider (ISP) account information
Collect your ISP account information, such as your account mobile phone number, user name, password,
and account number.
2. Turn off and disconnect existing modems and routers.
If you are replacing a modem that is currently connected in your home, unplug the modem and plug the
new cable modem router into the same outlet.
3. Connect a coaxial cable.
Use a coaxial cable to connect the cable coax connector on the cable modem router to the cable wall
outlet.
4. Connect the power adapter.
Connect the power adapter to cable modem router and plug the power adapter into an electrical outlet.
The startup procedure takes about one minute. When it is complete, the Power LED lights solid blue.
If the Power LED does not light, make sure that the Power On/Off button is in the On position.
5. Wait for the Online LED to light solid blue.
This process might take up to 10 minutes.
Orbi WiFi System
Hardware Setup
14