Recording Keyboard Play - Casio CT-X5000 User Manual

Using the MIDI Recorder to Record

Recording Keyboard Play

• The [RECORD] indicator will start to flash during recording
when the number of remaining note count is 100 or lower.
When there are no more remaining notes, recording stops
automatically and the [RECORD] indicator disappears.
• To make a new recording by selecting the recording
destination song number first, see "To change the recording
destination song number during recording standby" (page
EN-95).
• You can configure settings to sound a pre-count before
recording starts or the metronome while recording is in
progress. See "To sound a pre-count or the metronome"
(page EN-95).
• You can exit recording standby at any time ([RECORD]
indicator flashing) by pressing 8 RECORD/STOP once
or twice so the [RECORD] indicator is not displayed.
To record a new system track
1.
Press 6 RHYTHM.
2.
Specify the tempo to use at the start of
recording.
• See "Changing Auto Accompaniment Speed (Tempo)"
(page EN-46).
3.
Select the rhythm and tone you want to use at
the start of recording.
• See "Selecting a Rhythm" (page EN-43) and
"Selecting a Tone" (page EN-18).
• If you want to change mixer settings of each of the
system track parts, perform the procedure under "To
configure mixer settings" (page EN-64). Configure the
mixer settings of each part of the KEYBOARD part
group.
• Layer and split settings, as well as other settings are
also recorded. For details about recorded data, see
"Recording Track and Recorded Data" (page EN-90).
4.
Press 8 RECORD/STOP.
This enters recording standby.
• The [SONG] and [SYSTEM] indicators are also
displayed at this time, and the mixer part indicators
( to ) all start to flash. This indicates that the
system track is the recording target.
EN-92
Flashing
Displayed
5.
Playing on the keyboard automatically starts
recording.
• Pressing ck START/STOP starts the rhythm and
recording at the same time.
• While recording is in progress, the number of
measures since recording started is indicated in the
upper right corner of the display.
Measure
6.
When you are finished recording, press
8 RECORD/STOP.
This causes the [RECORD] indicator to disappear.
• Pressing ck PLAY/STOP will play back the recorded
data.
• Recording using the above operation automatically selects
the lowest song number (31 to 40) that does not have
anything recorded to it yet as the recording destination.
Displayed
Beat