Table of Contents
Advertisement
Quick Links
Contents
I
1
1.1
Performance Controller Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2
Sound Generator Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
3
II
4
5
6
7
8
8.1
Bank Select (00H,20H) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2
Modulation (01H) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.3
Portamento Time(05H) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.4
Data Entry (06H,26H) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.5
Volume (07H) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.6
Pan (0AH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.7
Expression (0BH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.8
Damper Pedal (Sustain) (40H) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.9
8.10
Sostenuto (42H) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CT-S100
MIDI Implementation
CASIO COMPUTER CO., LTD.
1
4
4
4
4
5
5
6
6
6
6
6
6
7
7
7
8
8
8
8
8
9
9
Advertisement
Table of Contents
Related Manuals for Casio CT-S100C7
Summary of Contents for Casio CT-S100C7
-
Page 1: Table Of Contents
CT-S100 MIDI Implementation CASIO COMPUTER CO., LTD. Contents MIDI Message Overview Product Configuration as a MIDI Device Performance Controller Section ....... . . - Page 2 8.11 Soft (43H) ..........8.12 Filter Resonance(47H) .
- Page 3 Value Notation 16.1 Hexadecimal Notation ........19 16.2 Binary Notation .
-
Page 4: Midi Message Overview
Part I MIDI Message Overview Product Configuration as a MIDI Device As a MIDI device, this Instrument consists of the Performance Controller Section and Sound Generator Section described below. Each of these sections can send and receive specific MIDI Messages in accordance with its function. -
Page 5: Timbre Type Specific Operation
Part Number Part Name Channel Assigned Function Keyboard Tone Selection Sound Operation Tone Metronome/Pre-count Auto Accompaniment (Percussion) Auto Accompaniment (Drum) Auto Accompaniment (Bass) Auto Accompaniment (Chord 1) Auto Accompaniment (Chord 2) Auto Accompaniment (Chord 3) Auto Accompaniment (Chord 4) Auto Accompaniment (Chord 5) MIDI/Auto Performance Functions MIDI/Auto Performance Functions MIDI/Auto Performance Functions... -
Page 6: Channel Message
Part II Channel Message Receive Channel The channel number of the channel message received by each part is shown in the table under “1.2.2 Instrument Part Block”. Send Channel Basically, the MIDI channel of the channel message sent when the Instrument is played coincides with the MIDI channel of the part being played. -
Page 7: Bank Select (00H,20H)
Message Format: BnH ccH vvH MIDI Channel Number Control Number Value For details about messages, see each section of this manual that covers them. Bank Select (00H,20H) Message Format: BnH 00H mmH (MSB) BnH 20H llH (LSB) MIDI Channel Number MSB Value(Note1) LSB Value(Send:00H, Receive:Ignored) Note1... -
Page 8: Data Entry (06H,26H)
Data Entry (06H,26H) Message Format: BnH 06H mmH (MSB) BnH 26H llH (LSB) MIDI Channel Number MSB Value LSB Value Transmit Sent when there is a change to the parameter assigned to RPN. Receive Receipt changes the parameter assigned to RPN. Volume (07H) Message Format: BnH 07H vvH... -
Page 9: Portamento On/Off(41H)
Receive Receipt performs an operation equivalent to a sustain pedal operation. Timbre Type Specific Operation This operation differs in accordance with the Timbre Type (see “About the Timbre Type” in “10 Program Change”) setting. • Timbre Type: Melody Sustain off/on control is performed in accordance with the value of the received message. •... -
Page 10: Release Time (48H)
Receive Receipt changes the filter resonance intensity. 8.13 Release Time (48H) Message Format: BnH 48H vvH MIDI Channel Number Value (Note1) Note1 For information about the relationship between setting values and send/receive values, see the “15.2 –64 - 0 - +63 Setting Value Table”... -
Page 11: Reverb Send Level (5Bh)
Receive Receipt of this message first stores the Source Note Number for the next note. When the next Note On is received, the portamento effect is applied to the note using this Source Note Number as the pitch start point and the Note On event key number as the end point. If there already is a note being sounded by Source Note Number at this time, the new note on is not performed and the portamento effect is applied to the pitch of the note being sounded. -
Page 12: Mode Message
8.18.3 Channel Coarse Tuning Message Format: BnH 64H 02H BnH 65H 00H BnH 06H mmH BnH 26H llH MIDI Channel Number MSB Value LSB Value Receive Receipt changes the coarse tune of the corresponding part. Does not affect sound source operation when the Timbre Type (see “About the Timbre Type”... -
Page 13: Omni Mode Off (All Notes Off) (7Ch)
Receive Receipt releases (key release) all voices that are sounding. Omni Mode Off (All Notes Off ) (7CH) Message Format: BnH 7CH 00H MIDI Channel Number Receive Receipt performs the same operation as when All Notes Off is received. Omni Mode On (All Notes Off ) (7DH) Message Format: BnH 7DH 00H MIDI Channel Number... -
Page 14: Channel Pressure (Aftertouch)
About the Timbre Type Tones that are selected by each Instrument part have an attribute that depends on the sound source operation type. This attribute is called the “timbre type,” which is one of the types described below. • Melody This timbre type optimizes for normal melody tones. -
Page 15: System Message
Part III System Message Active Sensing Message Format: Receive Once this message is received, the Active Sensing mode is entered. If no MIDI message is received for a specified amount of time, voices being sounded by this Instrument’s sound source are released, the controller is reset, and the Active Sensing mode is exited. - Page 16 Transmit Sent when Transpose is changed. Receive Receipt changes the Transpose parameter. Does not affect sound source operation when the Timbre Type (see “About the Timbre Type” in “10 Program Change”) is Drum. 14.1.4 Reverb Type Message Format: F0H 7FH 7FH 04H 05H 01H 01H 01H 01H 01H 00H vvH F7H Value(Note1) Note1 For information about the relationship between setting values and send/receive values, see “15.5 Reverb Type...
-
Page 17: Setting Values And Send/ Receive Values
Part IV Setting Values and Send/ Receive Values Setting Value Tables 15.1 Off/On Setting Value Table Transmit Value Receive Value Parameter 00H - 3FH 40H - 7FH 15.2 –64 - 0 - +63 Setting Value Table Transmit Value Receive Value Parameter 15.3 Pan Setting Value Table... -
Page 18: Reverb Type Setting Value Table
15.5 Reverb Type Setting Value Table Transmit Value Receive Value Parameter Room 1 Room 2 Room 3 Room 4 Hall 1 Hall 2 Hall 3 Hall 4 Stadium 1 Stadium 2... -
Page 19: Midi Implementation Notation
Part V MIDI Implementation Notation Value Notation 16.1 Hexadecimal Notation MIDI implementation sometimes requires that data be expressed in hexadecimal format. Hexadecimal values are indicated by the letter “H” after the value. The hexadecimal equivalents of decimal values 10 through 15 are expressed as the letters A through F. The table below shows the hexadecimal equivalents for decimal values 0 through 127, which are often used in MIDI messages. - Page 20 Decimal Hexadecimal Binary 00000000B 00000001B 00000010B 00000011B 00000100B 00000101B 00000110B 00000111B 00001000B 00001001B 00001010B 00001011B 00001100B 00001101B 00001110B 00001111B 00010000B 01111101B 01111110B 01111111B...