Casio CT-X5000 User Manual page 85

Creating an Auto Accompaniment (User Rhythm)
To copy an existing rhythm part for editing
• You cannot copy parts included in an intro or an
ending.
1.
In the Rhythm Editing Mode, select the copy
destination part.
• Perform steps 1 to 5 under "To create a totally new
rhythm and save it" (page EN-77), or steps 1 to 5
under "To edit an existing rhythm and save it" (page
EN-79).
2.
Press cs REGISTRATION [1].
This displays "Element".
3.
Use the [1] (V) and [3] (W) bm number keys
to display "Part", and then press [6] (ENTER).
This displays the currently selected rhythm number and
rhythm name.
4.
Use bn [–] and [+], or the bl dial to select the
number of the rhythm you want to use as the
source of the accompaniment pattern copy
operation.
5.
Select the accompaniment pattern that
includes the part you want to use as the copy
source.
The indicator for the currently selected accompaniment
pattern (page EN-47) will flash.
To select this:
Variation 1 to 4,
Fill-in 1 to 4
* Each press of the button toggles between Variation and Fill-
in.
EN-84
Press this button:
bp VARIATION/FILL-IN 1 to
bs VARIATION/FILL-IN 4*
6.
Select the part you want to use as the copy
source.
(1) Press 9 PART and confirm that the lamp to the left
of the button is lit.
(2) Use the bm number keys [1] through [8] to select the
part to be copied.
To select this part:
Percussion
Drums
Bass
Chord 1 to Chord 5
(3) Press 9 PART and confirm that the lamp to the left
of the button is unlit.
• Pressing ck START/STOP here starts looped
playback of only the part you selected as the copy
source.
7.
To execute the copy operation, press [6]
(ENTER).
This displays "Sure?"
8.
Press bn [+] (YES) to execute the copy
operation or bn [–] (NO) to cancel.
• The message "Wait..." remains on the display while
the copy operation is being performed. Do not perform
any operation while this message is on the display.
"Complete" appears on the display after the operation
is complete.
Press this number key:
[1]
[2]
[3]
[4] to [8]