Editing A Track Of A Recorded Song In Measure Units - Casio CT-X5000 User Manual

Editing a Track of a Recorded
Song in Measure Units
You can quantize, key shift, delete, or perform other
operations in measure units for each track included in a
recorded song.
• Quantize automatically corrects the timing of notes
recorded in a track to match a note value being used as the
quantize reference (note event note on timing).
• Key shift offsets the pitch of recorded notes (note events) in
semitone steps.
• In the procedure below, you specify a start measure (Point
A or simply Point), and an end measure (Point B). The
section specified by "Looping Playback of Specific Song
Measures (A-B Repeat)" (page EN-40) is used as the initial
default for this specification.
To quantize a specified track in measure
units
1.
Perform the procedure under "To enter the
Song Editing Mode" (page EN-99).
2.
Use the [1] (V) and [3] (W) bm number keys
to display "Trk Meas", and then press [6]
(ENTER).
This displays "Quantize".
3.
Press [6] (ENTER) again.
This displays "Trk Sy"
4.
Use bn [–] and [+] or the bl dial to specify the
target track, and then press [6] (ENTER).
This displays "Point A".
5.
Use bn [–] and [+], or the bl dial to select the
number of the first measure of the range you
want to quantize, and then press [6] (ENTER).
This displays "Point B".
6.
Use bn [–] and [+], or the bl dial to select the
number of the last measure of the range you
want to quantize, and then press [6] (ENTER).
This displays "Value".
7.
Use bn [–] and [+] or the bl dial to specify the
note value to be used as the quantize reference
note.
Display
4, 8, 16, 32 Quarter note, eighth note, sixteenth
note, thirty-second note
4d, 8d, 16d, 32d Dotted notes
4t, 8t, 16t, 32t Triplet notes
8.
Press [6] (ENTER).
This displays "Sure?"
Description
Using the MIDI Recorder to Record
9.
Perform the procedure under "To exit the Song
Editing Mode operation" (page EN-99).
To key shift a specified track in measure
units
1.
Perform the procedure under "To enter the
Song Editing Mode" (page EN-99).
2.
Use the [1] (V) and [3] (W) bm number keys
to display "Trk Meas", and then press [6]
(ENTER).
This displays "Quantize".
3.
Use the [1] (V) and [3] (W) keys to display
"KeyShift", and then press [6] (ENTER).
This displays "Trk Sy"
4.
Use bn [–] and [+] or the bl dial to specify the
target track, and then press [6] (ENTER).
This displays "Point A".
5.
Use bn [–] and [+], or the bl dial to select the
number of the first measure of the range you
want to key shift, and then press [6] (ENTER).
This displays "Point B".
6.
Use bn [–] and [+], or the bl dial to select the
number of the last measure of the range you
want to key shift, and then press [6] (ENTER).
This displays "Value".
7.
Use bn [–] and [+], or the bl dial to specify the
key shift setting value.
• You can specify a value of the range of –24 to 24.
Lowering the setting value by one lowers the pitch by
one semitone, while raising the value raises the pitch.
8.
Press [6] (ENTER).
This displays "Sure?"
9.
Perform the procedure under "To exit the Song
Editing Mode operation" (page EN-99).
EN-103