Song Editing Mode; Editing An Entire Song In Measure Units (Song Editing - Casio CT-X5000 User Manual

Song Editing Mode

Enter the Song Editing Mode to perform the operations below.
• Editing an entire song in measure units (page EN-99)
• Editing a recorded song in track units (page EN-101)
• Editing a track of a recorded song in measure units (page
EN-103)
• Editing a recorded song in event units (page EN-105)
• Inputting notes and chords one-by-one (page EN-108)
• Recorded song mixer settings (page EN-111)
To enter the Song Editing Mode
1.
Press 7 SONG BANK.
2.
Use the bm number keys, bn [–] and [+], or the
bl dial to select the number of the song you
want to edit.
3.
Long-press bk FUNCTION until the [EDIT]
indicator appears.
• This enters the Song Editing Mode and "Song"
appears on the display.
To exit the Song Editing Mode operation
• Perform the operation below at the end of Song Editing
Mode operation.
1.
Press bn [+] (YES) to execute the Song Editing
Mode operation, or bn [–] (NO) to cancel.
• Pressing bn [+] (YES) displays the message "Wait..."
(operation in progress). Do not perform any operation
while this message is on the display. "Complete"
appears on the display after the operation is complete.
2.
To exit the Song Editing Mode, long-press the
[4] (EXIT) bm number key.
Displayed
Using the MIDI Recorder to Record
Editing an Entire Song in Measure
Units (Song Editing)
Use the procedure below to edit an entire song (all of the
tracks included in the song) in measure units.
• In the procedure below, you specify a start measure (Point
A or simply Point), and an end measure (Point B). The
section specified by the procedure under "Looping
Playback of Specific Song Measures (A-B Repeat)" (page
EN-40) is used as the initial default for these settings.
To clear a specific range of measures within
a song
• Performing this operation makes the measures within the
specified range blank measures. It does not affect the total
number of measures in the song.
1.
Perform the procedure under "To enter the
Song Editing Mode" (page EN-99).
2.
Press the [6] (ENTER) bm number key.
This displays "Clear".
3.
Press [6] (ENTER) again.
This displays "Point A".
4.
Use bn [–] and [+], or the bl dial to select the
number of the first measure of the range you
want to clear, and then press [6] (ENTER).
This displays "Point B".
5.
Use bn [–] and [+], or the bl dial to select the
number of the last measure of the range you
want to clear, and then press [6] (ENTER).
This displays "Sure?"
6.
Perform the procedure under "To exit the Song
Editing Mode operation" (page EN-99).
EN-99