Casio CT-X5000 User Manual page 108

Y Tone Number Events
(1) Use the [2] (w) and [5] (q) bm number keys to
display "Tone" (Tone Number Event).
(2) If you want to check the name of the tone assigned to
the event, press bk FUNCTION.
• This displays the tone name. If you want to leave
the tone name displayed while changing the tone
number, go to step (3).
• Press bk FUNCTION again to return to the
"Tone" display.
(3) Use bn [–] and [+] or the bl dial to change the tone
number.
• To jump between categories, hold down
4 CATEGORY and press bn [–] (first tone in the
previous category) or [+] (first tone in the next
category).
Y Rhythm Number Event (System Track Only)
(1) Use the [2] (w) and [5] (q) bm number keys to
display "Rhythm" (Rhythm Number Event).
(2) If you want to check the name of the rhythm
assigned to the event, press bk FUNCTION.
• This displays the rhythm name. If you want to
leave the rhythm name displayed while changing
the rhythm number, go to step (3).
• Press bk FUNCTION again to return to the
"Rhythm" display.
(3) Use bn [–] and [+] or the bl dial to change the
rhythm number.
• To jump between categories, hold down
4 CATEGORY and press bn [–] (first rhythm in
the previous category) or [+] (first rhythm in the
next category).
Y Chord Event (System Track Only)
(1) Use the [2] (w) and [5] (q) bm number keys to
display a chord event.
(2) If there is no [ACCOMP] indicator displayed, press
cm ACCOMP to display it.
(3) Play the chord you want on the accompaniment
keyboard.
• This changes the chord type to the chord you play.
• For details about chord fingering modes, see
"Changing Accompaniment Keyboard Settings"
(page EN-48).
6.
To exit the event editing operation, press the
[4] (EXIT) bm number key.
7.
To exit the Song Editing Mode, long-press the
[4] (EXIT) bm number key again.
Displayed
Using the MIDI Recorder to Record
To delete an event
1.
Perform the procedure under "To enter the
Song Editing Mode" (page EN-99).
2.
Perform steps 2 and 3 under "To edit an event"
(page EN-106).
3.
Use the [2] (w) and [5] (q) bm number keys to
display the event you want to delete.
4.
Press the [9] (DELETE) bm number key.
• This deletes the displayed event.
To key shift events in measure units
1.
Perform the procedure under "To enter the
Song Editing Mode" (page EN-99).
2.
Perform steps 2 and 3 under "To edit an event"
(page EN-106).
3.
Press cs REGISTRATION [8] (EDIT MENU).
4.
Use the [1] (V) and [3] (W) bm number keys
to display "KeyShift", and then press [6]
(ENTER).
5.
Perform steps 5 through 9 under "To key shift
a specified track in measure units" (page
EN-103).
EN-107