Disconnect A Bluetooth Headset; Remove A Bluetooth Headset; Wireless Headsets; Enable An E-Hookswitch Headset - Cisco 8811 User Manual

Wireless Headsets

Disconnect a Bluetooth Headset

You should disconnect your Bluetooth headset before you use it with another device.
Procedure
Step 1
Press Applications
Step 2
Select Bluetooth.
Step 3
Select a Bluetooth headset.
Step 4
Press Disconnect.

Remove a Bluetooth Headset

Remove your Bluetooth headset if you aren't going to use it with your phone again.
Procedure
Step 1
Press Applications
Step 2
Select Bluetooth.
Step 3
Select a Bluetooth headset and press Delete.
Wireless Headsets
You can use most wireless headsets with your phone. For a list of supported headsets, see
c/en/us/products/unified-communications/uc_endpoints_accessories.html
Refer to your wireless headset documentation for information about connecting the headset and using its
features.

Enable an E-Hookswitch Headset

Electronic Hookswitch headsets use a base station and a wireless headset. The base station plugs into your
phone headset jack. After installing the headset, you enable it on the Cisco Unified Communications Manager.
Procedure
Step 1
Press Applications
Step 2
Navigate to Settings > E-Hookswitch connected.
Step 3
Select Yes.
Cisco IP Phone 8800 Series User Guide
104
.
.
.
Accessories
http://www.cisco.com/