Programming The Lockout Feature; Salt Setting (298 Conditioner) - GE Logix 764 Operation Manual

Programming the Lockout Feature

All Level I parameters can be locked out when the control
is in Level ll programming. Simply press the REGEN button
during Level ll programming and a Lock Icon will appear
indicating that the specific setting has been locked out.
When locked out, the setting cannot be adjusted. To
disable the Lock Out Feature, press the REGEN button
when in Level ll. The lock icon will not be displayed.

Salt Setting (298 Conditioner)

The default P6 salt setting is set at 9 lbs/cu ft. Under
normal circumstances this setting will provide the correct
system capacity. This setting may be adjusted to change
the exchange capacity.
Table 3 Standard Efficiency Exchange Capacity
Exchange
Salt
Capacity
lbs/cu ft
grains/cu ft
3 12714
4 15495
5 17774
6 19661
7 21250
8 22618
9 23828
10 24930
11 25962
12 26950
13 27916
14 28873
15 29829
16 30796
17 31783
18 32806
Exchange
Salt
Capacity
grams/
grams/
liter
liter
50 29.9
60 34.0
70 37.5
80 40.6
90 43.4
100 45.9
110 48.2
120 50.2
130 52.1
140 53.8
150 55.5
170 58.5
200 62.7
230 66.9
260 71.0
290 75.3
34