Xconfiguration Userinterface Keytones Mode; Xconfiguration Userinterface Language; Xconfiguration Userinterface Osd Halfwakemessage; Xconfiguration Userinterface Osd Output - Cisco TelePresence DX70 Reference Manual

Cisco TelePresence DX70 and DX80

Introduction

xConfiguration UserInterface KeyTones Mode

You can configure the system to make a keyboard click sound effect (key tone) when typing text
or numbers.
Requires user role: ADMIN, USER
Default value: Off
USAGE:
xConfiguration UserInterface KeyTones Mode:
where
Mode
: Off/On
Off: There is no key tone sound effect.
On: The key tone sound effect is turned on.

xConfiguration UserInterface Language

Select the language to be used in menus and messages on the screen. If the language is not
supported, the default language (English) will be used.
Requires user role: ADMIN, USER
Default value: English
USAGE:
xConfiguration UserInterface Language:
where
Language
: Arabic/Catalan/ChineseSimplified/ChineseTraditional/Czech/Danish/Dutch/English/
EnglishUK/Finnish/French/FrenchCanadian/German/Hebrew/Hungarian/Italian/Japanese/
Korean/Norwegian/Polish/Portuguese/PortugueseBrazilian/Russian/Spanish/SpanishLatin/
Swedish/Turkish
Select a language from the list.
D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xConfiguration
Mode
Language
xCommand

xConfiguration UserInterface OSD HalfwakeMessage

A custom message can be displayed in the middle of the main screen when the system is in
the half wake state. This will replace the default message "Tap the touch panel to get started"
together with an illustration of a Touch panel. You can also choose not to have a message.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration UserInterface OSD HalfwakeMessage: "HalfwakeMessage"
where
HalfwakeMessage
: String (0..128)
Add a custom message. If you add a space, there will be no visible message. Add an
empty string to remove a custom message.

xConfiguration UserInterface OSD Output

Define on which monitor the on-screen menus, information and indicators (OSD) should be
displayed. The system supports only one monitor, so this value is fixed and cannot be changed.
Requires user role: ADMIN, INTEGRATOR
Default value: Auto
USAGE:
xConfiguration UserInterface OSD Output:
where
Output
: Auto
Auto: The system sends the on-screen information and indicators to the system's
integrated display.
80
API Reference Guide
xStatus Appendices
Output
Copyright © 2017 Cisco Systems, Inc. All rights reserved.