Xconfiguration Conference Autoanswer Delay; Xconfiguration Conference Defaultcall Protocol; Xconfiguration Conference Defaultcall Rate; Xconfiguration Conference Donotdisturb Defaulttimeout - Cisco TelePresence DX70 Reference Manual

Cisco TelePresence DX70 and DX80

Introduction

xConfiguration Conference AutoAnswer Delay

Define how long (in seconds) an incoming call has to wait before it is answered automatically by
the system. Requires that AutoAnswer Mode is switched on.
Requires user role: ADMIN
Default value: 0
USAGE:
xConfiguration Conference AutoAnswer Delay:
where
Delay
: Integer (0..50)
The auto answer delay (seconds).

xConfiguration Conference DefaultCall Protocol

Define the Default Call Protocol to be used when placing calls from the system.
Requires user role: ADMIN
Default value: Auto
USAGE:
xConfiguration Conference DefaultCall Protocol:
where
Protocol
: Auto/H320/H323/Sip/Spark
Auto: Enables auto-selection of the call protocol based on which protocols are available.
If multiple protocols are available, the order of priority is: 1) SIP; 2) H323. If the system
cannot register, the auto-selection chooses H323.
H320: Not supported.
H323: All calls are set up as H.323 calls.
Sip: All calls are set up as SIP calls.
Spark: Reserved for Spark registered systems. Do not use.
D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xConfiguration
Delay
Protocol
xCommand

xConfiguration Conference DefaultCall Rate

Define the Default Call Rate to be used when placing calls from the system.
Requires user role: ADMIN, INTEGRATOR
Default value: 3072
USAGE:
xConfiguration Conference DefaultCall Rate:
where
Rate
: Integer (64..3072)
The default call rate (kbps).

xConfiguration Conference DoNotDisturb DefaultTimeout

This setting determines the default duration of a Do Not Disturb session, i.e. the period when
incoming calls are rejected and registered as missed calls. The session can be terminated
earlier by using the user interface. The default value is 60 minutes.
Requires user role: ADMIN, INTEGRATOR
Default value: 60
USAGE:
xConfiguration Conference DoNotDisturb DefaultTimeout:
where
DefaultTimeout
: Integer (1..1440)
The number of minutes (maximum 1440 minutes = 24 hours) before the Do Not Disturb
session times out automatically.
45
API Reference Guide
xStatus Appendices
Rate
DefaultTimeout
Copyright © 2017 Cisco Systems, Inc. All rights reserved.