Networkport Configuration; Xconfiguration Networkport [2] Mode; Networkservices Configuration; Xconfiguration Networkservices Cdp Mode - Cisco TelePresence DX70 Reference Manual

Cisco TelePresence DX70 and DX80

Introduction

NetworkPort configuration

xConfiguration NetworkPort [2] Mode

The video system has two network ports. The first network port is for connecting the video
system to Ethernet LAN. The second network port (also called the computer network port)
allows you to connect a computer to the Ethernet LAN via the video system. In this way, you
only need one network wall socket to support both the video system and the computer.
If the video system is used in a public environment we recommend that you disable this
network port, to prevent people from connecting a computer to your network through the video
system.
You have to restart the video system for any change to this setting to take effect.
Requires user role: ADMIN
Default value: On
USAGE:
xConfiguration NetworkPort Mode:
n
where
n
: Unique ID that identifies the network port Range: 2..2
Mode
: Off/On
Off: The computer network port is disabled.
On: The computer network port is available for use.
D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xConfiguration
Mode
xCommand

NetworkServices configuration

xConfiguration NetworkServices CDP Mode

Enable or disable the CDP (Cisco Discovery Protocol) daemon. Enabling CDP will make the
endpoint report certain statistics and device identifiers to a CDP-enabled switch. If CDP is
disabled, the Network VLAN Voice Mode: Auto setting will not work.
Requires user role: ADMIN
Default value: On
USAGE:
xConfiguration NetworkServices CDP Mode:
where
Mode
: Off/On
Off: The CDP daemon is disabled.
On: The CDP daemon is enabled.

xConfiguration NetworkServices H323 Mode

Define whether the system should be able to place and receive H.323 calls or not.
Requires user role: ADMIN
Default value: Off
USAGE:
xConfiguration NetworkServices H323 Mode:
where
Mode
: Off/On
Off: Disable the possibility to place and receive H.323 calls.
On: Enable the possibility to place and receive H.323 calls (default).
61
API Reference Guide
xStatus Appendices
Mode
Mode
Copyright © 2017 Cisco Systems, Inc. All rights reserved.