Userinterface Settings; Userinterface Contactinfo Type; Userinterface Custommessage; Userinterface Keytones Mode - Cisco TelePresence SX20 Quick Set Administrator's Manual

Cisco TelePresence SX20 Quick Set

Introduction

UserInterface settings

UserInterface ContactInfo Type

Choose which type of contact information to show in the status field in the upper left corner
of the display and Touch controller.
Requires user role: ADMIN
Default value: Auto
Value space: Auto/None/IPv4/IPv6/H323Id/H320Number/E164Alias/SipUri/SystemName/
DisplayName
Auto: Show the address which another system should dial to reach this video system.
The address depends on the default call protocol and system registration.
None: Do not show any contact information.
IPv4: Show the system's IPv4 address.
IPv6: Show the system's IPv6 address.
H323Id: Show the system's H.323 ID (refer to the H323 H323Alias ID setting).
H320Number: Show the system's H.320 number as contact information (only applicable
if connected to Cisco TelePresence ISDN Link).
E164Alias: Show the system's H.323 E164 Alias as contact information (refer to the H323
H323Alias E164 setting).
SipUri: Show the system's SIP URI (refer to the SIP URI setting).
SystemName: Show the system's name (refer to the SystemUnit Name setting).
DisplayName: Show the system's display name (refer to the SIP DisplayName setting).

UserInterface CustomMessage

A custom message can be displayed, in the lower left side of the screen, in awake mode.
Requires user role: ADMIN, INTEGRATOR
Default value: ""
Value space: String (0..128)
Add a custom message. Add an empty string to remove a custom message.
D15329.08 SX20 Administrator Guide CE9.2, NOVEMBER 2017.
Configuration Peripherals Maintenance

UserInterface KeyTones Mode

You can configure the system to make a keyboard click sound effect (key tone) when
pressing a key on the remote control, or when typing text or numbers on the Touch
controller.
Requires user role: ADMIN, USER
Default value: On
Value space: Off/On
Off: There is no key tone sound effect.
On: The key tone sound effect is turned on.

UserInterface Language

Select the language to be used in menus and messages on the screen and Touch
controller.
Requires user role: ADMIN, USER
Default value: English
Value space: Arabic/Catalan/ChineseSimplified/ChineseTraditional/Czech/Danish/Dutch/
English/EnglishUK/Finnish/French/FrenchCanadian/German/Hebrew/Hungarian/Italian/
Japanese/Korean/Norwegian/Polish/Portuguese/PortugueseBrazilian/Russian/Spanish/
SpanishLatin/Swedish/Turkish
Select a language from the list.
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
131
Administrator Guide
System settings System settings Appendices