Chapter 2 - Programming The Interface; Introduction; Programming The Interface - Plug And Play; Keyboard Wedge Connection - Honeywell 2020 User Manual

Cordless base accessory

Hide thumbs Also See for 2020:

Table of Contents

Programming the Interface

Chapter 1 describes connecting the base to the computer with the appropriate

interface cable. This chapter describes how to program your system for the

desired interface.

Plug and Play barcodes provide instant image scanner set up for commonly

used interfaces.

Note: After you scan one of the codes, power cycle the host terminal to have

the interface in effect.

If you want your system programmed for an IBM PC AT and compatibles

keyboard wedge interface with a USA keyboard, scan the barcode below.

Keyboard wedge is the default interface.

Note: The following barcode also programs a carriage return (CR) suffix.

For most laptops, scanning the Laptop Direct Connect barcode allows

operation of the image scanner in parallel with the integral keyboard. The

following Laptop Direct Connect barcode selects terminal ID 03, programs a

carriage return (CR) suffix and turns on Emulate External Keyboard

2020 User's Guide

IBM PC AT and Compatibles

with CR suffix

Laptop Direct Connect

with CR suffix

(page

2-13).

2 - 1

Table of Contents