Wand Emulation Delay Between Blocks; Wand Emulation Overall Checksum - Honeywell 2020 User Manual

Wand Emulation Delay Between Blocks

This sets the delay time between data blocks. Default = 50ms.
5ms
* 50ms
150ms
500ms

Wand Emulation Overall Checksum

When this option is turned on, a computed check character is added at the end
of the entire message. The check character is the character which when
Exclusive-OR'd with every preceding character of the message yields a result of
0x00 (00H). Default = Off.
Wand Emulation Overall
Checksum On
* Wand Emulation Overall
Checksum Off
2020 User's Guide 2 - 23