4
Utilities
To Add a Test Code I.D. Prefix to All Symbologies
This selection allows you to turn on transmission of a Code I.D. before the
decoded symbology. (See the
Symbology Chart,
beginning on page A-1) for the
single character code that identifies each symbology.) This action first clears all
current prefixes, then programs a Code I.D. prefix for all symbologies. This is a
temporary setting that will be removed when the unit is power cycled.
Add Code I.D. Prefix to
All Symbologies (Temporary)
Show Software Revision
Scan the barcode below to output the current software revision, unit serial
number, and other product information for both the image scanner and base.
Show Revision
Show Data Format
Scan the barcode below to show current data format settings.
Data Format Settings
Base Address
Scan the barcode below to determine the address of the base you are using.
Base Address
2020 User's Guide
4 - 1