Chapter 7 - Maintenance; Repairs; Maintenance; Cleaning The Device - Honeywell 2020 User Manual

Cordless base accessory

Hide thumbs Also See for 2020:

Table of Contents

Repairs and/or upgrades are not to be performed on this product. These

services are to be performed only by an authorized service center. See

"Customer Support" on page 8-1 for further information.

Maintenance

The cordless system provides reliable and efficient operation with a minimum of

care. Although specific maintenance is not required, the following periodic

checks ensure dependable operation:

Reading performance may degrade if the image scanner's window is not clean.

If the window is visibly dirty, or if the image scanner isn't operating well, clean the

window with a soft cloth or lens tissue dampened with water (or a mild detergent-

water solution). If a detergent solution is used, rinse with a clean lens tissue

dampened with water only.

The image scanner and base's housing may also be cleaned the same way.

Do not submerge the image scanner in water. The image

scanner's window – abrasive wipes may scratch the

window. Never use solvents (e.g., alcohol or acetone) on

the housing or window – solvents may damage the finish

Inspect the base's interface cable and connector for wear or other signs of

damage. A badly worn cable or damaged connector may interfere with image

scanner operation. Contact your Honeywell distributor for information about

cable replacement. Cable replacement instructions are on

2020 User's Guide

scanner's housing is not watertight.

Do not use abrasive wipes or tissues on the image

Caution:

page

7-2.

7 - 1

Table of Contents