Wand Emulation; Wand Emulation Connection; Wand Emulation Data Block Size - Honeywell 2020 User Manual

Cordless base accessory

Hide thumbs Also See for 2020:

Table of Contents

Wand Emulation

The Wand Emulation Connection barcodes should be used if you want to

change the terminal ID only , without changing any other image scanner settings.

We recommend using Wand Emulation Plug & Play barcodes to program your

image scanner to emulate a wand reader. The Wand Emulation Plug & Play

barcodes change other parameters, in addition to changing the terminal ID.

Please refer to

Wand Emulation Plug & Play

on page 2-2 for further information.

In Wand Emulation mode, the image scanner decodes the barcode then sends

data in the same format as a wand scanner. The Code 39 Format converts all

symbologies to Code 39.

The Same Code Format transmits UPC, EAN, Code 128 and Interleaved 2 of 5

without any changes, but converts all other symbologies to Code 39. 2D

symbologies are converted to Code 128.

The Code 39 Format barcode below sets the terminal ID to 61, and the Same

Code Format barcode sets the terminal ID to 64. Default = Code 39 Format.

Code 39 Format

Same Code Format

This transmits the data in smaller blocks to prevent buffer overflow. Default = 40.

* 40

2 - 22

2020 User's Guide

Table of Contents