Parameter 52: Xoff - Honeywell FBII CP-220A Hookup And Installation Instructions

REMEMBER!
To leave the Programming
Mode at any time, press the
Esc key. Doing so will
return the CP-220A to its
normal operating mode.
Programming changes will
be stored automatically.
PARAMETER 52:
XOFF
Page 2-98 Section 2: Programming the CP-220A CP-220A Central Station Receiver
MANUAL/PREVIOUS key to change the first character, as required. Once
this is done, use the
either the NEXT key or the MANUAL/PREVIOUS key to change it, if
necessary. Subsequent movement between the two digits can be
accomplished through the use of the
NOTE: The Automation
"handshaking" technique, or the default of [00] must be
programmed.
Default:
PARAMETER 51 is defaulted to [XON 00].
Advancing to Next Parameter
After programming PARAMETER 51, press the N key to advance to
PARAMETER 52 – the next parameter in Category C.
The CP-220A displays the parameter just programmed ([PARAMETER
NUMBER 51]) with its first digit flashing, indicating its request for the
next parameter number. Press either:
• 5 then 2 , or
• then key and 2 , or
• the
NOTE: When the
immediately – not its number.
XOFF 00
Background:
PARAMETER 52
background information, read PARAMETER 51 on page 2-97 before
programming this parameter.
Programming Procedures:
After entering PARAMETER 52, [XOFF 00] will be displayed, with the first
[0] after [XOFF] flashing. Although it's customary to use ASCII [19] for
XOFF, any value between [01] and [FF] may be programmed. Use the
NEXT key or the MANUAL/PREVIOUS key to change the first character, as
required. Once this is done, use the
As before, use either the NEXT key or the MANUAL/PREVIOUS key to
change it, if necessary. Subsequent movement between the two digits can
be accomplished through the use of the
key to move to the second character. As before, use
key or the
System must
key
is used, the name of the next parameter appears
MM/DD/YY HH:MM:SS
goes hand-in-hand with
key to move to the second character.
Hook-Up and Installation Manual
key.
support the
PARAMETER
key or the key.
XON/XOFF
51. For