Cisco TelePresence SX20 Quick Set

Installing Cisco TelePresence SX20 Quick Set
SX20 Quick Set components
y SX20 Codec y HDMI cable for monitor
(1 default and 1 optional)
Camera options
y
Ethernet cable for LAN
y
A: PrecisionHD 1080p 12X
y VGA to DVI-A cable
B: PrecisionHD 1080p 4XS2
for PC connectivity
C: PrecisionHD 1080p 2.5X
Camera cable
y
y Table Microphone 20
y Power supply and
(1 default and 1 optional)
power cable
Remote control and
y
Camera mounting bracket
y
four AAA batteries
y Microphone extension cable
y Touch 8" controller (optional)
(optional)
Touch 10" controller (optional)
y
y Codec wall mounting kit
(optional)
In addition to the SX20 Quick Set you must provide a monitor or
projector, and a loudspeaker (external or built-in to the monitor) to
complete your video conferencing system.
A 级声明 (A Class product declaration)
User guides
本产品为 A 级 ITE，在其使用说明，铭牌等显著位置中已包含如下内容的声明
User guides and compliance and safety information for this product, is
(We declare here that the subject product is A class ITE product, and the
available at http://www.cisco.com/go/quickset-docs
following statement is clearly marked in the user manual or nameplate):
EMC Class A declaration
警告
此为 A 级产品。在生活环境中，该产品可能会造成无线电干扰。在这种
情况下，可能需要用户对干扰采取切实可行的措施。
WARNING: This is a class A product. In a domestic environment this product
WARNING:
may cause radio interference in which case the user may be required to take
This is a class A product. In a domestic environment this
adequate measures.
product may cause radio interference in which case the user may be
required to take adequate measures.
78-20385-02B SX20 Quick Set Installation Sheet | 2015 MARCH | © 2011-2015 Cisco Systems, Inc. All rights reserved.
Recommended room setup
The following should be regarded as Camera
guidelines only. Try things out on-site
Place the camera at eye height to get the
before fixing any mounting positions.
best perceived eye contact. Typically, this
is about 1.2 m (4 ft) above the floor.
To learn more about how to optimize
your office or meeting room for video Use the camera self view function to
conferencing, please read the Video make sure all participants are captured by
conferencing room primer and Guidelines the camera.
for video conferencing room acoustics
Aim for good illumination of a person's
documents available on our web site.
face to avoid shadows. Also avoid direct
light on the monitor to prevent reflections.
Camera option A: PrecisionHD 1080p 12X
Microphones
Place the microphone(s) as close to all
meeting participants as possible.
Camera option B: PrecisionHD 1080p 4XS2
Camera option C: PrecisionHD 1080p 2.5X
Read the assembly instructions that
comes with the bracket for directions
how to fasten the camera and bracket
to the monitor.
Snap on the lens hood to Typical room scenario:
prevent stray light from Medium to large
meeting room.
disturbing your video
experience.
You can use the provided
70˚
camera bracket to place
the camera on top of the
monitor. Fasten the bracket
to the monitor with Velcro.
The camera snaps to the
magnets on the bracket.
You can use the provided Typical room scenario:
camera bracket to place Medium sized
the camera on top of the meeting room.
monitor. Fasten the bracket
to the monitor with Velcro.
70˚
The camera is fastened to
the bracket with a screw.
Tool: 4 mm Allen Key (not
provided).
Typical room scenario:
Small office or
meeting room.
83˚