Cisco TelePresence SX20 Codec Reference Manual page 62

Cisco TelePresence SX20 Codec
Contents Introduction
xConfiguration Video Input Source [1..3] Type
Set which type of input source is connected to the video input.
Requires user role: ADMIN
Value space: <other/camera/PC/DVD/document_camera>
Other: Select Other when some other type of equipment is connected to the selected video input.
Camera: Select Camera when you have a camera connected to the selected video input.
PC: Select PC when you have a PC connected to the selected video input.
DVD: Select DVD when you have a DVD player connected to the selected video input.
Document_Camera: Select Document_Camera when you have a document camera connected to
the selected video input.
Example: xConfiguration Video Input Source 1 Type: PC
xConfiguration Video Input Source [1..3] PresentationSelection
In general, any input source can be used as a presentation source; normally, the main camera (self
view) will not be used as a presentation source.
This setting is used to define whether to display the presentation source on the local video system's
display automatically or not. To share the presentation with the far end always requires additional
action (tap Start Presenting on the Touch controller or the Presentation key on the remote control).
The default values for all input sources are Manual.
Requires user role: ADMIN
Value space: <Manual/Automatic/Hidden>
Manual: The content on the input source will not be presented on the local video system's display
before you select it. Use either the remote control or the Touch controller to choose which input
source to present.
Automatic: Any content on the input source will be presented on the local video system's display
automatically. If there is active content on more than one input source (which is set to Automatic)
the most recent one will be used.
Hidden: The input source is not expected to be used as a presentation source.
Example: xConfiguration Video Input Source 1 PresentationSelection: Manual
SX20 Codec API Reference Guide TC6.2, JULY 2013.
D14949.04
About the API xConfiguration xConfiguration
xConfiguration Video Input Source [1..3] CameraControl Mode
xConfiguration Video Input Source [1..3] CameraControl CameraId
62
xCommand
Select whether or not to enable camera control for the selected video input source when the video
input is active.
Requires user role: ADMIN
Value space: <Off/On>
Off: Disable camera control.
On: Enable camera control.
Example: xConfiguration Video Input Source 1 CameraControl Mode: On
Indicates the ID of the camera. This value is fixed in this product.
Value space: <1>
Range: Indicates the ID of the camera.
API Reference Guide
xStatus Appendices
Copyright © 2013 Cisco Systems, Inc. All rights reserved.