Xstatus Sip Profile 1 Authentication; Xstatus Sip Profile 1 Proxy [1] Address; Xstatus Sip Profile 1 Proxy [1] Status; Xstatus Sip Profile 1 Secure - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec
Contents Introduction
xStatus SIP Registration [1..n] Authentication
Shows which authentication mechanism is used when registering to the SIP Proxy Server.
Digest: Uses the Digest access authentication method, as specified by RFC 2069.
NTLM: Uses the NTLM authentication method, which is a Microsoft authentication protocol.
Off: No authentication mechanism is used.
Value space of the result returned:
<Digest/NTLM/Off>
Example:
xStatus SIP Registration 1 Authentication
*s SIP Registration 1 Authentication: Off
** end

xStatus SIP Profile 1 Proxy [1] Status

Shows the status of the communication between the endpoint and the SIP Proxy server.
Active: The communication between the endpoint and the SIP Proxy is active.
DNSFailed: The attempt to establish communication to the DNS server failed.
Off: There is no communication between the endpoint and the SIP Proxy.
Timeout: The attempt to establish communication to the SIP Proxy timed out.
UnableTCP: The system is unable to use TCP as the transport method.
UnableTLS: The system is unable to use TLS as the transport method.
Unknown: The status of the communication is not known.
Value space of the result returned:
<Active/DNSFailed/Off/Timeout/UnableTCP/UnableTLS/Unknown>
Example:
xStatus SIP Profile 1 Proxy 1 Status
*s SIP Profile 1 Proxy 1 Status: Active
** end

xStatus SIP Profile 1 Proxy [1] Address

Shows the address of the SIP Proxy that the system communicates with.
Value space of the result returned:
<String>
Example:
xStatus SIP Profile 1 Proxy 1 Address
*s SIP Profile 1 Proxy 1 Address: "192.0.2.50"
** end
SX20 Codec API Reference Guide TC6.2, JULY 2013.
D14949.04
About the API xConfiguration

xStatus SIP Profile 1 Secure

xStatus SIP Profile 1 Verified

xStatus SIP Profile 1 Authentication

161
xCommand
Shows the encryption status of the signaling with the SIP Proxy server.
Value space of the result returned:
<True/False>
Example:
xStatus SIP Profile 1 Secure
*s SIP Profile 1 Secure: True
** end
Shows whether or not the SSL certificate of the server that the video system / codec tries to
register to is included in the codec's trusted CA-list. The server is typically a Cisco VCS or CUCM.
True: The server's SIP certificate is checked against the trusted CA-list on the codec and found
valid. Additionally, the fully qualified domain name of the server matches the valid certificate.
False: A TLS connection is not set up because the SIP certificate verification failed or the
domain name did not match. Note that the status also returns False when TLS is not used
(xConfiguration SIP Profile 1 DefaultTransport not set to TLS) or certificate verification is switched
off (xConfiguration SIP Profile TlsVerify set to Off).
Value space of the result returned:
<True/False>
Example:
xStatus SIP Profile 1 Verified
*s SIP Profile 1 Verified: False
** end
Shows which authentication mechanism is used when registering to the SIP Proxy Server.
Digest: Uses the Digest access authentication method, as specified by RFC 2069.
NTLM: Uses the NTLM authentication method, which is a Microsoft authentication protocol.
Off: No authentication mechanism is used.
Value space of the result returned:
<Digest/NTLM/Off>
Example:
xStatus SIP Profile 1 Authentication
*s SIP Profile 1 Authentication: Off
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2013 Cisco Systems, Inc. All rights reserved.