Table 1009 Advisory Inhibit And Tcas Mode Data - Honeywell CAS-100 Maintenance Manual

CAS-100 COLLISION AVOIDANCE SYSTEM
Table 1009. Advisory Inhibit and TCAS Mode Data
Advisory Inhibit
No.1 No.2
1 X
0 1
0 X
0 X
0 0
Where 0 = Open
1 = Ground
X = Don't care
NOTE: Advisory Inhibit 1 has precedence over the other Advisory Inhibit input.
(c) TCAS Data Display Screen
To push the Select button when the TCAS Data is the Active Selectable Item on the
Input select screen causes the TCAS Data screen 1/8 to be shown.
The TCAS Data screen shows the validity and the value of input data for the
following input used by TCAS:
• Digital Radio Altitude
• Analog Radio Altitude
The priority of Radio Altitude sources is:
1. Digital Radio Altitude No. 1
2. Digital Radio Altitude No. 2
• Pressure Altitude
• Roll
• Pitch
• Heading
• Climb Inhibit Increase Climb Inhibit Discretes
• Air/Ground Discrete
• Landing Gear Discrete
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.
MAINTENANCE MANUAL
No.3 No.4
X X Standby (SL=1)
X X TA Only (SL=2)
1 X TA Only (SL=2)
X 1 TA Only (SL=2)
0 0 Normal
34-45-47
TCAS Mode
3. Analog Radio Altitude No. 1
4. Analog Radio Altitude No. 2
Page 1031
1 Dec 2003