C. Symbols
(1)
The symbols in Figure Intro-1 may be used to identify static sensitive (ESDS) and
moisture sensitive devices.
D. Weights and Measurements
(1)
All weights and measurements are in U.S. values and S.I. (metric values).
(2)
The letter symbols for units of measurement are the same as shown in the GPO Style
Manual and in ANSI/IEEE Std 260.
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.
MAINTENANCE MANUAL
CAS-100 COLLISION AVOIDANCE SYSTEM
Figure Intro-1. Symbols
34-45-47
Page INTRO-5
1 Dec 2003