Verification; Intro-4 1 Dec - Honeywell CAS-100 Maintenance Manual

PUBLICATION
Standard Repair Procedures for Honeywell
Avionics Equipment Instruction Manual
Abbreviations for Use on Drawings and in Text* ASME Y14.38-1999
Graphic Symbols for Electrical and Electronics
Diagrams*
Standard Letter Symbols for Units of
Measurement*
Graphic Symbols for Logic Functions*
NOTES:
1. You can order a Honeywell publication from Honeywell as follows:
Telephone No. (425) 885-8367
Fax No. (425) 885-8722
Email: Sandra.Slick@honeywell.com
2. *Available from the American National Standards Institute, New York, NY
B. Verification
(1) Verification of these technical instructions is done by performance or by simulation of the
necessary procedures. Checks of the manual by the engineering staff make sure the
instructions and description data agree with the applicable engineering specifications
and drawings and are accurate and sufficient. The level of verification for this manual is
shown in the list that follows.
Testing and Fault Isolation
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.
MAINTENANCE MANUAL
CAS-100 COLLISION AVOIDANCE SYSTEM
Table Intro-1. Related Publications (cont)
Subheading
PUBLICATION No.
A09-1100-004
(Formerly ASME Y1.1-1989)
ANSI Y32.2 (1974)
ANSI/IEEE Standard (Std) 260
(1978)
ANSI/IEEE STD 91 (1984)
By performance, 1 Dec 2003
34-45-47
ATA No.
Level of Verification
Page INTRO-4
1 Dec 2003