Tcas Accessories; Table 2 Tcas Accessories - Honeywell CAS-100 Maintenance Manual

Table 1. TCAS System Components (Honeywell Supplied) (cont)
NOTES:
1. One or two directional antennas can be used in a CAS-100 system. A top-mounted ANT-81A is always
necessary. To find intruder bearing on bottom antenna, an ANT-81A must be installed on the bottom of
the aircraft.
2. Used if ANT-81A directional antenna is not used for bottom TCAS antenna.
3. IVA-81A/D used if traffic displays are not provided on another display unit (i.e. PPI or TCAS dedicated
traffic display unit) or if user requires RA and TA displays on the same unit.
4. IVA-81B is used if pointer traffic resolution displays are given on another display unit (i.e. PPI or TCAS
dedicated traffic display unit) and user does not require RA and TA displays on the same unit.
5. The fundamentals of TRA-67 Mode S Transponder System operation in the CAS-100 system are shown
in this manual. For more Mode S transponder and Mode S transponder control unit details, refer to
TRA-67 ATC Mode S Transponder System Manual, I.B. 1167 and related Component Maintenance
Manuals (refer to Table Intro-1. in the INTRODUCTION section).
6. The purpose and function for the different control units are given in paragraph 7 (Controls and
Indicators) in this section of this manual.
C. TCAS Accessories
Table 2 lists accessories for the TPA-100A processor. Accessories for the dedicated display,
directional antenna, TA/VSI, RA/VSI, and the Mode S transponder system are shown in
applicable maintenance manuals. Refer to Table 5.
Equipment Type
TCAS Processor
Installation Kit-Connector
TCAS Processor Coax
Termination Kit (requires four
per directional antenna)
Cable Type:
RG-214
RG-393
AA-5886
AA-5887, FC-28
AA-5888
ECS-311201
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.
MAINTENANCE MANUAL
CAS-100 COLLISION AVOIDANCE SYSTEM
Table 2. TCAS Accessories
Honeywell
Part Number
050-50000-0501
050-50005-0501
050-50005-0502
050-50005-0503
050-50005-0504
050-50005-0505
050-50005-0506
Description
The installation kit supplies parts for
assembling the TCAS processor
mounting tray connector.
The termination kit supplies parts for
connecting the directional antenna cable
to the TCAS Processor mounting tray.
34-45-47
Page 14
1 Dec 2003