Image Location On The Switch; Tar File Format Of Images On A Server Or Cisco.com - Cisco Catalyst 2950 Software Configuration Manual

Hide thumbs Also See for Catalyst 2950:
Table of Contents

Advertisement

Working with Software Images
This section includes this information:
For a list of software images and the supported upgrade paths, see the release notes.
Note

Image Location on the Switch

The software image is stored as a .bin file in a directory that shows the version number. A subdirectory
contains the HTML files needed for web management. The image is stored on the system board flash
memory (flash:).
You can use the show version privileged EXEC command to see the software version that is currently
running on your switch. In the display, check the line that begins with
shows the directory name in flash memory where the image is stored.
You can also use the dir filesystem: privileged EXEC command to see the directory names of other
software images you might have stored in flash memory.

tar File Format of Images on a Server or Cisco.com

Software images located on a server or downloaded from Cisco.com are provided in a tar file format,
which contains these files:
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
B-20
Appendix B
Image Location on the Switch, page B-20
tar File Format of Images on a Server or Cisco.com, page B-20
Copying Image Files By Using TFTP, page B-21
Copying Image Files By Using FTP, page B-24
Copying Image Files By Using RCP, page B-28
info file
The info file is always at the beginning of the tar file and has information about the files within it.
Cisco IOS image
Web management files needed by the HTTP server on the switch
LRE binary files needed for the proper functioning of LRE interfaces and LRE CPE devices.
info.ver file
The info.ver file is always at the end of the tar file and has the same information as the info file.
Because it is the last file in the tar file, its existence means that all files in the image have been
downloaded.
Working with the Cisco IOS File System, Configuration Files, and Software Images
System image file is...
78-11380-12
. It

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 2955

Table of Contents