Enabling A Partial Configuration; Displaying Cns Configuration - Cisco Catalyst 2950 Software Configuration Manual

Displaying CNS Configuration

Enabling a Partial Configuration

Beginning in privileged EXEC mode, follow these steps to enable the CNS configuration agent and to
initiate a partial configuration on the switch:
Command
Step 1
configure terminal
Step 2 cns config partial {ip-address | hostname} [port-number]
[source ip-address]
Step 3
end
Step 4 show cns config stats
or
show cns config outstanding
Step 5 show running-config
Step 6 copy running-config startup-config
To disable the CNS configuration agent, use the no cns config partial {ip-address | hostname} global
configuration command. To cancel a partial configuration, use the cns config cancel privileged EXEC
command.
Displaying CNS Configuration
You can use the privileged EXEC commands in
Table 5-2 Displaying CNS Configuration
Command
show cns config connections
show cns config outstanding
show cns config stats
show cns event connections
show cns event stats
show cns event subject
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
5-12
Purpose
Displays the status of the CNS configuration agent connections.
Displays information about incremental (partial) CNS configurations that have started but
are not yet completed.
Displays statistics about the CNS configuration agent.
Displays the status of the CNS event agent connections.
Displays statistics about the CNS event agent.
Displays a list of event agent subjects that are subscribed to by applications.
Chapter 5
Purpose
Enter global configuration mode.
Enable the configuration agent, and initiate a partial
configuration.
For {ip-address | hostname}, enter the
•
IP address or the host name of the configuration
server.
• (Optional) For port-number, enter the port
number of the configuration server. The default
port number is 80.
• (Optional) Enter source ip-address to use for the
source IP address.
Though visible in the command-line help
Note
string, the encrypt keyword is not supported.
Return to privileged EXEC mode.
Verify information about the configuration agent.
Verify your entries.
(Optional) Save your entries in the configuration file.
Table 5-2 to display CNS Configuration information.
Configuring IE2100 CNS Agents
78-11380-12